In short
For an aluminum die casting quote, send the current drawing revision, a 3D model if available, the alloy or intended use, the first order quantity and expected annual demand. Mark the features that affect assembly, sealing or appearance. Specify any machining, finishing and inspection required so the supplier can quote the same scope you intend to buy.
What should go in the first email or form?
- Part identification. Include the part name, number and drawing revision. Match the revision of the PDF and the STEP model, and tell the supplier which document controls if they differ.
- Material and application. Give the required alloy if it is specified. If material selection is open, describe the assembly, environment and function so candidate alloys can be discussed.
- Order profile. List sample quantity, first production order and estimated annual demand separately when available. Include the date you need parts or samples and flag any dates that are still provisional.
- Critical features. Mark mating faces, bearing bores, threads, gasket surfaces or visual zones. Call out where the drawing specifies machining, fit, finish or a functional test.
- Finishing and acceptance. List the finish, any masking or appearance requirements, and the first-article or shipment documents you expect. Flag any project-specific inspection or certification requirement up front.
How do I compare quotes for the same part?
Ask the supplier to show tooling and recurring part cost separately. Check whether first samples, machining, finishing, inspection reports and packing are included or quoted as separate items. When tooling is involved, agree on ownership, maintenance and transfer terms. If a quote depends on a change to the drawing or on a minimum order, ask for that assumption in writing.
Copy this brief into the RFQ
- Part number and drawing revision
- 2D drawing and 3D model availability
- Alloy or intended application
- Sample quantity, first order and annual usage
- Critical dimensions, machining and finish
- First-article documents or special tests
- Target dates and any open decisions
- NDA needed before file sharing? Yes / No
Can I ask for a review before the drawing is finished?
Yes. Describe the part, the quantity and what it needs to do. Flag the decisions still open, such as alloy, finish or a critical mating dimension. This is enough to start an engineering discussion. The quotation can be completed once the remaining scope is agreed. For confidential work, tick the NDA option before sending drawings.
Start an aluminum die casting quote. Send the project brief. If your drawing is ready to share, use the email link on the quote page and include your reference number when you have one.
Related guides · DFM before tooling · Machining die cast features · Quality and inspection