Request a Quote

Die Cast Part Machining

Secondary CNC machining for castings: datum faces, bores, tapped holes, sealing surfaces and any feature that cannot be held as-cast. Fixtures are planned around the casting, because as-cast surfaces are rarely a good datum. Fixtures are engineered, not improvised, so the datum holds run after run.

Machines, tolerances and inspection equipment are listed under Factory & equipment; the ones running your part are named in the quotation.

Flanged bearing seat Hub flange Impeller disc

Service scope

The datum decides the fixture, and the fixture decides the result.

  • Datum and fixture planningThe machining datum is chosen from a cast feature that can be located repeatably — not from a surface that moves with draft and shrinkage.
  • Holes, threads and sealing facesMachined after casting to the drawing, with the inspection method agreed for each critical feature.
  • First-off approvalThe first machined part is inspected against the drawing before the run continues.

Representative parts

Castings machined on fixtures built for them. Photographs show machined parts; the datum and fixture plan are agreed before the run.

View the full part library

Capabilities

What the machining route covers on castings, from the datum choice to first-off approval.

  • Secondary CNC Datum faces, bores, tapped holes and sealing surfaces machined after casting.
  • Fixtures engineered Workholding planned around the casting; as-cast surfaces are rarely a good datum.
  • First-off before the run The first machined part is measured against the drawing before the run continues.
  • Tolerances per feature Agreed on the drawing together with the inspection method, not as a plant-wide figure.
  • Threads as specified Metric or imperial, cut to the drawing.
  • Records with the parts Final checks and the agreed inspection records travel with the shipment.

Production route

Machining starts from the casting, not from a blank: datum, fixture and program are planned around the part as cast.

01
Casting review Available stock, draft and stable datum features.
02
Fixture plan Workholding designed around the casting.
03
Programming Tool paths, cutters and cycle plan.
04
First-off inspection The first part is measured before the run continues.
05
Production machining Machining with in-process checks.
06
Final inspection and packing Final checks and protective packing.

Inspection

Machined features are measured from a datum that repeats on the casting, not from a surface that moves with draft and shrinkage.

  • Datum and fixtureThe datum is taken from a cast feature that locates repeatably, and the fixture is planned around the casting.
  • First-off approvalThe first machined part is measured against the drawing before the run continues.
  • Threads and sealing facesThreads are checked with plug or thread gauges; sealing faces are checked for flatness and finish where the drawing asks for it.
  • Records with shipmentThe first-off report and the final dimensional records travel with the shipment.

Where a feature cannot be held as-cast, the machining plan states how it will be produced and how it will be measured.

Questions engineers ask

As-cast surfaces carry draft, shrinkage and parting-line variation. A bore, a sealing face or a thread usually needs a machined surface to meet the drawing and to be measured repeatably.

It is agreed between the casting and machining plans. Choosing it after the tool is built is expensive, so it belongs in the DFM review.

Yes, when the casting is sound and the datum features can be re-established. Send the drawing and a sample; the review confirms which machines and fixtures hold the part and what the secondary operation will cost.

The machining department runs CNC mills and lathes for milling, drilling, tapping and secondary operations on castings. Which machines run your part is fixed when the route is quoted, and the machine list can be shared during the review.

Have a drawing for this route?

Include the material, quantity and the features that matter. If the drawing is confidential, ask for the NDA step before sending it.