Request a Quote

Aluminum Die Casting

Aluminum die casting for housings, brackets and structural components, produced on tooling we build for our own casting cells. Castings can pass to the CNC department for datum faces, bores, threads and sealing surfaces before inspection. From the first DFM notes to the last inspection record, one team owns the route.

Representative parts from our production. Alloy and process route are confirmed on your drawing.

Gearbox housing Lamp body heat sink

Service scope

Wall section, rib layout and gate position decide how the part fills.

  • Housings and enclosuresShells and covers with drafted walls, ribs and mounting bosses. Cast geometry is reviewed against the drawing before tooling is released.
  • Structural castingsBrackets and frames where section thickness, rib layout and gate position decide how the part fills and cools.
  • Machined castingsBores, tapped holes and sealing faces are machined after casting, with the datum agreed at drawing review.

Representative parts

Flanges, heat sinks and machined blocks cast on our own tooling. Alloy, wall section and machining stock are agreed on the drawing, not chosen from a photograph.

View the full part library

Capabilities

What the aluminum route covers here, from the casting cells to the features machined after casting.

  • Casting cells Die casting cells from 130 to 800 T across aluminium and zinc.
  • Tooling in-house Mould design and manufacture for our own casting cells.
  • Castings machined in-house Datum faces, bores, threads and sealing surfaces after casting.
  • Drawing review first DFM notes on walls, draft, ribs and machining stock before the tool is released.
  • Measured before delivery Trial and first-off parts measured against the drawing; records travel with the shipment.
  • Typical parts Housings, brackets and handles.

Production route

Six stages, in the order they are approved. Tooling and casting can overlap in time; the approval order cannot.

01
Drawing review DFM notes on walls, draft, ribs and machining stock.
02
Tooling Mould design and manufacture for the allocated machine.
03
Trial and sample approval Trial parts measured against the drawing.
04
Die casting Production runs on the allocated casting cell.
05
CNC and finishing Datum faces, holes, threads and sealing surfaces; coating where specified.
06
Inspection and delivery Final checks against the agreed plan, recorded and shipped.

Inspection

Cast surfaces and machined features are checked against your drawing and the approved sample.

  • Drawing requirementsCritical dimensions, appearance faces and functional requirements are listed before the route is committed, so the inspection plan matches your drawing rather than a template.
  • Trial and first-offTrial parts from the mould and the first machined part are measured and approved before the run continues.
  • Machined featuresBores, threads and sealing faces added after casting are checked with the gauges named in the inspection plan.
  • Records with shipmentThe dimensional report for the part travels with the shipment, in the format agreed at quotation.

Per feature: callipers and plug or thread gauges on the shop floor for machined features; CMM or profile projector for critical cast geometry; a ballooned drawing for first-off approval.

Questions engineers ask

A 2D drawing with critical dimensions, a 3D model where available, the alloy if already chosen, target quantity and any surface or inspection requirement. A drawing is enough to start; we will confirm what is still missing during review.

Yes. Mould design and manufacture sit inside the die casting department, so the mould and the casting process are planned together and the tool is matched to the cell that will run it. Ownership, maintenance and transfer are written into the quotation for each project.

Yes — secondary CNC machining is handled by the same company. The datum, fixture and inspection method are agreed at quotation, because as-cast faces are rarely suitable as a machining datum.

Yes — every part shown is from our production. The alloy, coating and process route for your part are confirmed on the drawing, not from a photograph.

Have a drawing for this route?

Include the material, quantity and the features that matter. If the drawing is confidential, ask for the NDA step before sending it.